Plate Heater - Self-Leveling Heated Dispenser

Specifications

  • Stainless steel is nickel-bearing, 200 series minimum. This material is NSF recognized for corrosion resistance.
  • Electrical: 208/220 VAC, 60 Hz, single phase.
    Eight foot grounded 20 amp power cord supplied.
  • NEMA 6-20P plug.
  • Option: Can be ordered in 240 VAC.
  • Construction: The outer unit is constructed of 18 gauge stainless steel. Inner walls are constructed of .063 high strength alumninum. All sides and lids of unit are insulated with fiberglass insulation.
  • Lids: Unique hat channel design requires no gaskets.
  • Heating System: Thermostatically controlled, forced air heating system with 3200 watt element.
  • Self-Leveling Dispenser: Individual, removable, self-adjusting and all stainless steel construction. Self-lubricating bearings ride over vertical guide rods. Available stacking height is 27 1/4".
  • Casters: Unit is mounted on four 5" diameter swivel casters with non-marking cushion tread, two with swivel-lock and wheel brake.
Model Overall Size Casters Shipping Weight Case Cube Electrical Specifications Thermostat
Range
W D H Type Dia. lbs. Cu. ft. Watt Amp Volt
PALPH1002 33 3/8" 23 3/4" 42 3/4" 4 swivel,
2 w/brake
5" 270 24.0 3200 16.3


15
208/220
60 Hz

240
135 to 175 degrees
Farenheit
PALPH1503 43 7/16" 23 3/4" 42 3/4" 4 swivel,
2 w/brake
5" 335 31.1 3200 16.3


15
208/220
60 Hz

240
135 to 175 degrees
Farenheit